General Description; Statement On Cleanliness And Care; Engine Diagnosis General Description - Suzuki Grand Vitara 2011 Manual

1A-3 Engine General Information and Diagnosis: For Petrol Engine Model

Statement on Cleanliness and Care

An automobile engine is a combination of many
machined, honed, polished and lapped surfaces with
tolerances that are measured in the thousands of an
millimeter (ten thousands of an inch).
Accordingly, when any internal engine parts are
serviced, care and cleanliness are important.
It should be understood that proper cleaning and
protection of machined surfaces and friction areas is part
of the repair procedure. This is considered standard
shop practice even if not specifically stated.
• A liberal coating of engine oil should be applied to
friction areas during assembly to protect and lubricate
the surfaces on initial operation.
• Whenever valve train components, pistons, piston
rings, connecting rods, rod bearings, and crankshaft
journal bearings are removed for service, they should
be retained in order.
At the time of installation, they should be installed in
the same locations and with the same mating
surfaces as when removed.
• Battery cables should be disconnected before any
major work is performed on the engine.
Failure to disconnect cables may result in damage to
wire harness or other electrical parts.
• The four cylinders of the engine are identified by
numbers; No.1 (1), No.2 (2), No.3 (3) and No.4 (4)
counted from crankshaft pulley side to flywheel side.

General Description

S6JB0A1111001

Engine Diagnosis General Description

This vehicle is equipped with an engine and emission
control system which are under control of ECM.
The engine and emission control system in this vehicle
are controlled by ECM. ECM has an On-Board
Diagnostic system which detects a malfunction in this
system and abnormality of those parts that influence the
engine exhaust emission. When diagnosing engine
troubles, be sure to have full understanding of the outline
of "On-Board Diagnostic System Description: For Petrol
Engine Model" and each item in "Precautions in
Diagnosing Trouble: For Petrol Engine Model" and
execute diagnosis according to "Engine and Emission
Control System Check: For Petrol Engine Model".
There is a close relationship between the engine
mechanical, engine cooling system, ignition system,
exhaust system, etc. and the engine and emission
control system in their structure and operation. In case of
an engine trouble, even when the malfunction indicator
lamp (MIL) doesn't turn ON, it should be diagnosed
according to "Engine and Emission Control System
Check: For Petrol Engine Model".
[A]
4
3
2
[B]
[A]: J20 engine
[B]: M16 engine
1
4
3
2
1
I5JB0A110001-02
S6JB0A1111002