5. Detailed Menu Operation
5.6 IR Receiver Setting
The product (wired remote controller) has a built-in "IR Receiver" which can receive commands from the
wireless remote controller(sold separately, models: HCRB10NEWQ/PC-LH7QE/PC-LH7QE1).
By pointing the transmitter of the wireless remote controller to this product, you can set temperature,
operation mode, etc. from the wireless remote controller.
This function is only available when the IR receiver function is set at ON. For how to set "IR Receiver" ON/OFF,
please refer to Page 32. And the default setting of "IR Receiver" is ON.
•
Sending Commands from Wireless Remote Controller
After the transmitter of the wireless remote controller is directed to the wired remote controller, press the
buttons to send commands.
(1) When the commands are sent, the indication "
(2) When the "IR Receiver" receives the commands, the buzzer sounds.
Wired Remote Controller
31
" on the LCD of wireless remote controller flashes once.
Wireless Remote Controller (sold separately)