Advertisement
7. Main Remote Setting
•
Concerning main and sub controllers, the range of settings may differ for the function shown below.
1. Changing from the sub controller to the main controller.
Step1. Press "
start the changing from the sub controller to the main
controller. The changed screen is displayed.
Step2. When the change is over, it returns to the home
screen.
NOTES:
•
When using two controllers, only the primary controller can be set as the main controller. In cases where two
controllers are both sub controllers, the "Main Remote Setting" is only accessible from the primary controller.
•
In cases where the primary controller is a "Main Controller" and the secondary controller is a "Sub Controller",
when the primary controller and the secondary controller are changed by the function selection, Main and Sub
controllers will also be switched simultaneously.
•
If the main controller icon "
the cable connection.
•
If a remote control group is operating with multiple refrigerant systems, the Outdoor Unit Capacity Control
function may not operate normally.
37
Table E. Relation between Main/Sub Controller and Setting Range
Function
Outdoor Unit
Power Saving On/Off Setting
Capacity Control
○: Available ×: Not Available
" and "
" simultaneously for 3 seconds to
" is not displayed, the main controller may not function normally. Please verify
Main
Sub
○
×
Flash to
Indicate
Changing
Process
Advertisement
