Advertisement
9. NFC Setting
9. NFC Setting
The default setting of NFC is "Disable". When using NFC, the function should be enabled firstly. Once enabled,
there is no need for subsequent enabling process because of its memory function. Please refer to related manual
of airCloud Tap for the operation method of NFC.
NOTES:
•
NFC is the abbreviation of "Near field communication". NFC can improve service and installation.
•
If the wired remote controller may be accessible to unauthorized third-party, please set the NFC to "Disable".
1. Enable NFC Function (if NFC is in disable state)
Step1. Press "
NFC setting screen.
Step2. Press " "or " "to enable/disable NFC.
NFC OFF/ON state code is indicated on the screen.
Table F. Relation between State Code and State Description
State Code
Step3. Press "
NOTE:
•
When NFC is OFF, "
When NFC is ON, "
39
"and " "simultaneously for 3 seconds to display
State Description
0 0
NFC mode is disabled.
0 1
NFC mode is enabled.
"to complete the setting and return to the home screen.
"is displayed on the home screen.
"is displayed on the home screen.
NFC State
Code
NFC Icon
Advertisement
