Table of Contents
Advertisement
Publication no. 201101
Note that first item is "Blank", this because first item is default.
No Proj Alternative
01:
02:
03:
04:
05:
AP/PA
Next step is to define the "Technol" field as described in "3.2.2 Picture, Win1/Win2" on page
5.
To define an auto sequence the NIC must be set in normal operation mode. From the main
window, press SHIFT+F3 to enter the "Technologist setup".
Technologist set-up
00: "LEK
02: "
03
04: "
05: "
Here is a technologist initial "LEK" with the autosequence "RCC, LCC, LMLO and RMLO de-
fined. Use the up- /down arrow keys to select a new row and enter a initial. Press ENTER
to move the cursor to the first item in the sequence, use the F2- and F3 key to select a view.
Press ENTER again will move the cursor the the next item. Maximum 20 initials/auto se-
quences can be defined.
To test an auto sequence. Enter the patient data window, fill in patient data and enter a de-
fined technologist initial in the 'Technol' field, e.g. 'LEK'. This will bring up the first item de-
fined for the initial LEK. Insert a cassette into the NIC slot and make an exposure, i.e. flash
a film, will change the view to next defined value, from RCC to LCC, a new exposure from
LCC to LMLO and so on.
Beatle, Judy
01585112
LEK
Technol field
October 2005
"
"
"RCC
"
"LCC
"
"RMLO "
"LMLO "
Previous
" RCC
" -----
"
" -----
" -----
" -----
Previous
23.06.1955
RCC
Menu field
NIC2-2 · Installation and Set-up Manual
Next
Save
LCC
LMLO
-----
-----
-----
-----
-----
-----
-----
-----
Next
Exit
09.11.2005
14:32
Exit
10
RMLO
-----
-----
-----
-----
Triacon AB Sweden
Advertisement
Table of Contents
