Settings - Siemens NIC2-2 Installation And Startup Manual

Network id camera
Hide thumbs Also See for NIC2-2:
Table of Contents

Advertisement

NIC2-2 · Installation and Set-up Manual

3.6 Settings

Selecting this item will present a window where some configurations that do not fit within the
other items are gathered.
Settings
Language
Country
Cursor
Erase bookinglist at power interrupt Yes
Exposuredata Optional
Use the up and down arrows to move the cursor between the settings, and use Previous and
Next soft-keys to select option.
Selects the language the Network ID Camera will speak. Available are; En-
Language
gland, Iceland, Germany, France, Spain, Portugal, Holland, Italy, Sweden,
Denmark, Norway and Finland. Factory default is 'ENGLAND'.
will select country-depending settings like date format, PID number format.
Country
Available are; England, Iceland, Germany, France, Spain, Portugal, Holland,
Italy, Schweiz, Belgium, USA, Canada, Sweden, Denmark, Norway and Fin-
land. Factory default is 'ENGLAND'.
The country and language settings are separated because there are coun-
tries where more than one language is common, but where the date format
and PID number are the same. Canada and Switzerland are two examples.
Selects how the cursor should appear on the display. The cursor can be se-
Cursor
lected as line or block. Place the cursor at "LINE" position to select line or
block Factory default is 'LINE'.
Erase bookinglist at power interrupt
This setting defines, whether the booking list downloaded from a host com-
puter should be erased or retained when the power is switched off. Note that
the setting will be changed by toggling between the words Erase and Retain
at the beginning of the sentence. Factory default is 'Yes'.
Exposure data
This setting defines, whether the film may be exposed when no exposure
data has been received from an X-ray unit. The setting will be changed by
toggling between the words Optional and Mandatory. Factory default is 'Op-
tional'.
This setting is a compensation for light loss at the left- and right edges. should
Fade
be set to 'No' if an optical filter is used. Factory default is 'Yes'.
Triacon AB Sweden
ENGLAND
ENGLAND
LINE
Previous
Next
29
Publication no. 201101
Fade Yes
Exit
October 2005

Advertisement

Table of Contents
loading

Table of Contents