Dc-181 Board - Sony AXS-R7 Service Manual

2-15.

DC-181 Board

Preparation
1. Remove the docking module. (Refer to
2. Remove the IF-1308 board assembly. (Refer to
Procedure
1. Remove the DC-181 board assembly.
(1) Remove the three screws, and then remove the DC-181 board assembly.
(2) Disconnect the four harnesses from the four connectors (CN202, CN204, CN205, CN303) on the DC-181
board.
Harnesses
CN204
CN205
Note
When attaching the DC-181 board assembly, be careful not to pinch the harnesses.
AXS-R7
"2-2. Docking Module")
"2-14. IF-1308
Harness
CN202
Board")
PSW2 x 5
DC-181 board assembly
Harness
CN303
2-32