Polaris RZR XP Turbo Service Manual page 210

EFI / FUEL SYSTEM
9. Remove the fuel cap
Torx screws retaining the right rear passenger rocker
u
panel . Remove the rear fender and rocker panel
from the vehicle. Install the fuel cap back on the fuel
tank.
10. Remove the two bolts
retaining the front of the seat base frame and two rear
a
bolts .
s
11. Remove fastener
the seat base frame. The strap does not need to be
removed from the vehicle. Remove the seat base
assembly from the vehicle.
4.22
y
. Remove the push rivets and
i
and two T40 Torx screws
retaining the fuel tank strap to
12. Remove the Torx screws
retaining the block-off panel using a T40 Torx driver.
13. Remove the Torx screws
o
14. Remove the cover panel and remove the fuel tank
h
vent line from the tank fitting.
Carefully bend back the cover panel by the fuel fill neck.
Do not bend the plastic so far as to crack the panel or
permanently deform the plastic.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
d
and plastic rivets
g
retaining the fuse box.
NOTE
© Copyright Polaris Industries Inc.
f