Activating / Deactivating The Display Illumination And Projection; Adjusting The Projection Sharpness, Angle And Direction - Silvercrest Z30951A Operation And Safety Notes

Activating / deactivating the
display illumination and
projection
You can activate the display illumination and the
projection by pressing a key, generating a noise
(e.g. a hand clap) or touching the device at any
place (acoustic and contact function).
Slide the S / C switch
Activate the display illumination by pressing a key,
generating a noise or touching the device at
any place. The display illumination switches on
for 5 seconds and then automatically switches off.
In addition, slide the projection switch
ON position.
Activate the projection by pressing a key, gener-
ating a noise or touching the device at any place.
The projection switches on for 20 seconds and
then automatically switches off.
Deactivate the projection by sliding the projection
switch
Deactivate the acoustic and contact function by
sliding the S / C switch
Adjusting the projection
sharpness, angle and direction
Rotate the projection objective
projection direction (forwards / backwards) by
using the adjustment wheel
Rotate the sharpness control wheel
the projection sharpness.
Press the projection direction button
the projection direction through 180°.
66 GB/MT
63698_silv_Projektions-Funkwecker_Content_LB5.indd 66
to the ON position.
25
to the OFF position.
27
to the OFF position.
25
to the
27
to the desired
18
(see Fig. E).
29
to adjust
19
to turn
20
27.07.11 13:11