Fitting The Chart And Pen Capsule; Fitting The Chart; Fitting The Pen Capsule - ABB C1300 Quick Start Manual

10 C 1 3 0 0/A DVA N C E D C I R C U L A R C H A R T R E C O R D E R | C I/C 1 3 0 0 - E N R E V. C

6 Fitting the chart and pen capsule

Fitting the chart

1 Use the
key to lift the pens from the chart and return
them to the home position.
2 Lift the chart clamp and remove the chart:
3 Fit new chart ensuring it is beneath the pen lift bars, located
under the chart guides and aligned to the timeline with the
red pen:
4 Lower the chart clamp and secure in place:

Fitting the pen capsule

1 Use the
key to lift the pens from the chart and return
them to the home position.
2 Gently pull the pen arm from the bracket, taking care not
bend the arms during fitting or removal:
3 Remove spent capsule:
4 Fit new pen capsule ensuring arm locates in the pen capsule
slot:
5 Ensure that pen arm is positioned above the correct lifter
bar and slide pen arm onto the appropriate bracket until it
clips into place:
lifter bars