Mechanical Installation; Safety; Examining The Installation Site - ABB ACS580MV Quick Manual

Mechanical installation

Safety

All installation work must be carried out by qualified personnel according to the site
and equipment requirements and in compliance with the local regulations.

Examining the installation site

The installation site is sufficiently ventilated or cooled to transfer away the drive
losses. The maximum heat losses and cooling air flow are listed in
(2UBB013672 [English]).
Engineering Guideline
The ambient conditions of the drive shall not be higher than 40°C during operation
of the drive. In case the temperature out of the scope, contact ABB to get support.
ACS580MV can be installed using one of the four following cooling solutions:
•
Air conditioner solution (recommended)
•
Air duct solution
•
Fresh air circulation solution
•
Air-to-water heat exchanger solution
Mechanical installation 11
4
ACS580MV