Table of Contents
Advertisement
METPOINT
®
CID
1. Safety instructions
1.1 About this document
Carefully read this documentation and familiarize yourself with the product before using it. Observe
all safety instructions and warnings in particular so as to prevent injury and damage to the product.
Keep this documentation within reach so that you will be able to consult it if necessary.
Pass on this documentation to later users of the product.
1.2 General safety instructions
• Use the product properly and exclusively as intended and within the
parameters specified in the technical data. Do not use force.
• Do not, under any circumstance, use the device to measure on or close to live
parts!
• When detecting leaks on electrical systems, please make sure to maintain a
safe distance so as to avoid dangerous electric shock!
• Avoid direct contact with hot or rotating parts.
• Always switch the device on before connecting the headphones! The volume
can be high when the signal levels are high (headphone bars in red range).
1.3 Using Class 2 lasers
• Do not, under any circumstance, point the integrated laser directly at your or
someone else's eyes! Do not, under any circumstance, hit a person's or animal's
eyes with the laser beam!
• Laser module: Conforms to DIN EN 60825-1: 2015-07 Class 2 (< 1 mW)
• Observe the specified storage and operating temperatures.
• Using the device improperly or trying to use force on it will void the warranty.
• Tampering of any kind that is not in conformity with the intended and
described processes will void the warranty and exclude all liability.
• The device is intended exclusively for the purpose described.
1.4 Environmental protection
• Dispose of faulty rechargeable batteries and dead batteries in compliance with
all applicable regulations.
• After this product reaches the end of its service life, dispose of it as
e-waste (in compliance with all local regulations) or return the product to
BEKO TECHNOLOGIES for disposal.
4 | 28
Quick Start Guide
Advertisement
Table of Contents
