Table of Contents
Advertisement
METPOINT
®
CID
1. Safety instructions
1.1 About this document
Carefully read this documentation and familiarize yourself with the product before using it. Observe all safety
instructions and warnings in particular so as to prevent injury and damage to the product. Keep this documentation
within reach so that you will be able to consult it if necessary.
Pass on this documentation to later users of the product.
1.1.1 General safety instructions
•
Use the product properly and exclusively as intended and within the parameters specified in
the technical data. Do not use force.
•
Do not, under any circumstance, use the device to measure on or close to live parts! When
detecting leaks on electrical systems, please make sure to maintain a safe distance so as to
avoid dangerous electric shock!
•
Avoid direct contact with hot rotating parts.
•
Always switch the device on before connecting the headphones! The volume can be high when
the signal levels are high (headphone bars in red range). You can use the sensitivity setting to
reduce the volume.
•
Observe the specified storage and operating temperatures.
•
Using the device improperly or trying to use force on it will void the warranty.
•
Tampering of any kind that is not in conformity with the intended and described processes will
void the warranty and exclude all liability.
•
The device is intended exclusively for the purpose described.
1.1.2 Using Class 2 lasers
•
Do not, under any circumstance, point the integrated laser directly at people!
•
Do not, under any circumstance, hit a person's or animal's eyes with the laser beam!
•
If a Class 2 laser beam hits your eyes, close your eyes and immediately move your head out of
the beam's path.
•
Do not look into the direct or reflected beam.
•
Horn and parabolic mirror laser exit points:
4 | 56
Laser exit point
Original installation and operation manual
Laser exit point
Advertisement
Table of Contents
