Original installation and operation manual
12.3.1.5 Storing a measurement on the internal SD card
Store -> store
12.3.2 Export / Import
By tapping Export / Import, you can:
•
Transfer recorded "leakage data" to a USB drive
•
Export and import system settings
•
Export and import measuring points (company, building and place information)
•
Enable / load optional measuring tools that are not enabled
Before the measurement is saved for good on the internal SD card, a
summary will be created and you will be asked to confirm in order to make
sure that everything is correct.
To save the measurement, confirm by tapping "Yes."
Tapping "No" will take you back to the previous menu.
METPOINT
CID
®
29 | 56