Original installation and operation manual
Settings -> Device settings -> SD-Card -> Test SdCard
12.3.4.2.4 Updating the system
For the METPOINT
CID, you have the option of loading a firmware update onto the device with the USB drive if
®
necessary. If an update becomes necessary, you can download it from the BEKO TECHNOLOGIES homepage.
After this, you will need to unzip the file to the USB drive and transfer it to your device as shown below.
Settings -> Device settings -> Update System
Enabling the Test SdCard checkbox will run an SD card test.
When this test is run, data is written to the SD card and then read from it.
The number of test cycles, as well as any errors and the corresponding
error codes, will be shown in the status bar.
Tapping the Back button will take you back to the Device settings menu.
Overview of Update System functions
METPOINT
CID
®
39 | 56