Device Information Display Menu (D1) - Sony Betacam SX DNW-A100 Maintenance Manual

Example of display and operation (D0)
Superimpose picture
DISK MAINTENANCE MODE
D0:ERROR COUNTER
*
[ID-00]
Recovered 0
Medium 0
Medium(Total) 0
Hardware 0
Others
0
DIAL (2)
(omitted)
0
DIAL (2)
DISK MAINTENANCE MODE
D0:ERROR COUNTER
[ID-00]
Recovered 0
Medium 0
Medium(Total) 0
Hardware 0
*
Others
0
DIAL (2)
DISK MAINTENANCE MODE
D0:ERROR COUNTER
[ID-01]
*
Recovered 0
Medium 0
Medium(Total) 0
Hardware 0
Others
0
DIAL (2)
(omitted)
0
DIAL (2)
DISK MAINTENANCE MODE
D0:ERROR COUNTER
[ID-01]
Recovered 0
Medium 0
Medium(Total) 0
Hardware 0
*
Others 0
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Time data display area
_ID-00_
RECOVERE
D 0
MEDIUM
0
MEDIUM(T
) 0
HARDWARE
0
OTHERS
0
_ID-01_
RECOVERE
D 0
MEDIUM
0
MEDIUM(T
) 0
HARDWARE
0
OTHERS
0

4-3-3. Device Information Display Menu (D1)

4-3-3. Device Information Display Menu (D1)
The D1 : DEVICE INFO menu is used to display the
device information of a hard disk drive.
The displayed device information is as follows:
Device information
. Product name
Displays the manufacturer name and model name of a
hard disk drive.
. Serial number
Displays the serial number of a hard disk drive.
. SCSI revision
Displays the revision of the SCSI interface software in a
hard disk drive.
. Servo ROM revision
Displays the revision of the servo ROM in a hard disk
drive.
. Servo RAM revision
Displays the revision of the servo RAM in a hard disk
drive.
Menu operation
All device information items in one ID number are super-
imposed on the video monitor.
The * mark moves by one line at a time when the search
dial is turned.
To display the device information in other ID numbers,
turn the search dial again.
In a time data display area, the contents of which the *-
marked line displayed on the superimpose picture is
displayed.
This menu is terminated when the MENU button is
pressed.
n
The device information becomes blank when the hard disk
drive is not completely activated immediately after the
power is turned on. The device information is displayed
when the hard disk drive is activated.
Menu termination
Press the MENU button to terminate this menu.
4-3. DISK Maintenance Mode (M1)
4-3-2. Error Counter Display Menu (D0)
4-73