Hdd Diagnosis Menu (D2) - Sony Betacam SX DNW-A100 Maintenance Manual

4-3. DISK Maintenance Mode (M1)
4-3-3. Device Information Display Menu (D1)

4-3-4. HDD Diagnosis Menu (D2)

Example of display and operation (D1)
Superimpose picture
DISK MAINTENANCE MODE
D1:DEVICE INFO
*
[ID-00]
Product Name:
SEAGATE ST19171W
Serial No. : LA136291
SCSI Rev : 02036509
SV ROM Rev : 81718171
SV RAM Rev : 8150815
0
DIAL (2)
(omitted)
0
DIAL (2)
DISK MAINTENANCE MODE
D1:DEVICE INFO
[ID-00]
Product Name:
SEAGATE ST19171W
Serial No. : LA136291
SCSI Rev : 02036509
SV ROM Rev : 81718171
*
SV RAM Rev : 8150815
0
DIAL (2)
DISK MAINTENANCE MODE
D1:DEVICE INFO
*
[ID-01]
Product Name:
SEAGATE ST19171W
Serial No. : LA046473
SCSI Rev : 02036509
SV ROM Rev : 81718171
SV RAM Rev : 815081
0
DIAL (2)
(omitted)
0
DIAL (2)
DISK MAINTENANCE MODE
D1:DEVICE INFO
[ID-01]
Product Name:
SEAGATE ST19171W
Serial No. : LA046473
SCSI Rev : 02036509
SV ROM Rev : 81718171
*
SV RAM Rev : 8150815
4-74
Time data display area
_ID-00_
PRODUCT
NAME=
SEAGATE
ST19171W
SERIAL
LA136291
SCSI REV
02036509
SV ROM
81718171
SV ROM
81718171
_ID-01_
PRODUCT
NAME=
SEAGATE
ST19171W
SERIAL
LA046473
SCSI REV
02036509
SV ROM
81718171
SV RAM
81508150
4-3-4. HDD Diagnosis Menu (D2)
The D2 : DIAGNOSIS menu is used to measure the
operation performance of the connected all hard disk
drives and to display the result. If the operation perfor-
mance of a hard disk drive is insufficient for use in this
unit, failure may occur during REC/PB operation that is
performed via the hard disk drive.
The three measurement items below are available. If one
of the measurement items fails, replace the hard disk drive
corresponding to the ID number.
Measurement items
. OUTMOST RATE
Indicates the transfer rate when the data in the outermost
circumference of a hard disk is read.
The measurement value fails for 0735 or less.
. INNERMOST RATE
Indicates the transfer rate when the data in the innermost
circumference of a hard disk is read.
The measurement value fails for 0480 or less.
. SEEK TIME
Indicates the head seek time between the outermost and
innermost circumferences of a hard disk.
The measurement value fails for 2400 or more.
n
For the replacement of a hard disk drive incorporated into
this unit, refer to Section 5 in the maintenance manual part
2, volume-1.
An HDD installation menu (D3 : INSTALLATION) is
activated when the power is turned on after replacement.
Perform the initialization for the replaced hard disk drive.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P