Matching Connectors And Cables - Sony Betacam SX DNW-A100 Maintenance Manual

1-7. Matching Connectors and Cables

When external cables are connected to the connector of this unit, the hardware listed below (or equiva-
lents) must be used.
Panel indication Matching connector (cable)
VIDEO INPUT BNC 75Z, MALE
VIDEO OUTPUT BNC 75Z, MALE
DIGITAL INPUT BNC 75Z, MALE
DIGITAL OUTPUT BNC 75Z, MALE
AUDIO INPUT XLR 3P, MALE
AUDIO OUTPUT XLR 3P, FEMALE
(Note2
AES/EBU BNC 75Z, MALE
TIME CODE IN XLR 3P, MALE
TIME CODE OUT XLR 3P, FEMALE
MONITOR OUTPUT XLR 3P, FEMALE
VIDEO CONTROL D-SUB 15P, FEMALE and
JUNCTION SHELL 15P
RS-232C D-SUB 25P, MALE
REMOTE (9P) 9P remote control cable
(RCC-G series)
or
D-SUB 9P, MALE and
JUNCTION SHEEL 9P
(Note5
SCSI Differential 68P (SCSI-2) cable
or
SCSI terminal connector
PHONE (Note6 JM-60 stereo phone plug
Note 1: Coaxial cable length : max. 200 m (Reference value based on DNW series)
It is recommended to connect the BELDEN8281 cable or equivalent to this connector.
Note 2: With optional kit BKNW-105.
Note 3: Coaxial cable length : max. 600 m (Reference value based on DNW series)
It is recommended to connect the BELDEN8281 cable or equivalent to this connector.
Note 4: Two types of the SCSI terminal connector are used. The SCSI terminal connector to be used
depends on the type of the SSX board used in the unit.
SSX board : SCSI terminal connector
SSX-1 board : 1-774-818-11
SSX-2 board : 1-794-076-11
The difference of the SSX boards depends on the type of the internal hard disk drive.
Note 5: Connects the disk array cable supplied with BKNW-116 (extended hard disk unit).
If not, connect the SCSI terminal connector supplied with this unit.
Note 6: It exists on the front (upper control panel).
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
Sony part No.
_
_
(Note1 _
(Note1
_
1-508-084-00
1-508-083-00
(Note3
_
1-508-084-00
1-508-083-00
1-508-083-00
1-561-610-21
1-561-929-00
1-566-356-11
_
1-560-651-00
1-561-749-00
1-769-670-31 (Suppllied with BKNW-116)
See Note 4.
_
1-7. Matching Connectors and Cables
1-9