Details Of Menu Mode - Epson Stylus Pro 3880 User Manual

5. Set the item
Press the Menu/Right r button to enter the selected item. The first parameter appears on the
LCD panel.
6. Select a parameter
Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a parameter for the
item.
7. Set the parameter
Press the Enter
only, press the Enter
After execution, the printer exits Menu mode and returns to the READY status.
8. Exit Menu mode
Press the Cancel/Reset + button. The printer returns to the READY status.

Details of Menu mode

PRINTER SETUP
This menu contains the following items.
PLATEN GAP
You can adjust the distance between the print head and paper. Normally, leave this set to
STANDARD. If you find that printed images are smeared, select WIDE or WIDER. Select NARROW for
printing on thin paper, or WIDEST for printing on thick paper.
PAPER SIZE CHECK
When you select ON, the printer stops printing if the width of paper loaded in the printer does not
match the data width. When you select OFF, the printer continues to print even if the paper width
does not match the data width, and the printer may print beyond the paper.
Note:
❏ When you load the paper using the manual feed slot, select ON.
❏ When you perform borderless printing, select ON.
button to store the selected parameter. If the parameter is for execution
button to execute the function for the item.
Epson Stylus Pro 3880 User's Guide
The Control Panel 128