Epson Stylus Pro 3880 User Manual page 139

11. Select THICKNESS PATTERN, and then press the Menu/Right r button. Press the Enter
button to print the paper thickness test printing pattern.
Paper thickness test pattern example:
1
12. Examine the printed pattern to determine which set of lines are aligned (showing the smallest
gap), and note the corresponding number.
13. After the pattern is printed, THICKNESS NUMBER appears. Press the Paper Feed/Down d or
Ink Cover Open/Up u button to select the number noted in step 12, and then press the
Enter button to save the selected value.
14. Press the Back/Left l button.
15. Select PAPER FEED ADJUST A, and then press the Menu/Right r button. Press the Paper Feed/
Down d or Ink Cover Open/Up u button to set the paper feed amount of the printable area
(A area in the illustration below), and then press the Enter
16. Press the Back/Left l button.
5 8
2 3 4 6 7
A
Epson Stylus Pro 3880
10 11 12 13 14 15
9
button.
User's Guide
The Control Panel 139