Epson Stylus Pro 3880 User Manual page 140

17. Select PAPER FEED ADJUST B, and then press the Menu/Right r button. Press the Paper Feed/
Down d or Ink Cover Open/Up u button to set the paper feed amount of the bottom area
that is 2 or 3 cm from the bottom of the paper (B area in the illustration below), and then press
the Enter button.
18. Press the Back/Left l button.
19. Select DRYING TIME, and then press the Menu/Right r button. Press the Paper Feed/
Down d or Ink Cover Open/Up u button to select the time in seconds, and then press the
Enter button to save the selected value.
20. After registering the paper settings, press the Cancel/Reset + button to exit Menu mode.
Selecting the registered settings
To select the registered settings, follow the steps below.
1. Press the Menu/Right r button to enter Menu mode.
2. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display CUSTOM PAPER,
and then press the Menu/Right r button.
3. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select the number
registered that you want to use. If you select STANDARD, the printer prints data according to the
driver settings. If you select No. X, the control panel settings override the driver settings.
4. Press the Enter
panel.
5. Press the Cancel/Reset + button to exit Menu mode.
B
button. If you select No. X, the number you selected appears on the LCD
Epson Stylus Pro 3880 User's Guide
The Control Panel 140