Epson Stylus Pro 3880 User Manual page 138

❏
Thickness pattern
❏
Thickness number
❏
Paper feed adjustment
❏
Drying time
Registering the settings
To register the paper settings, follow the steps below.
1. Load the paper that you want to check.
2. Press the Menu/Right r button to enter Menu mode.
3. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display CUSTOM PAPER.
4. Press the Menu/Right r button to display PAPER NUMBER.
5. Press the Menu/Right r button, and then press the Paper Feed/Down d or Ink Cover Open/
Up u button to select STANDARD or the number (No. 1 to No. 10) you want to register as the
setting.
If you use Epson special media, select STANDARD. You do not need to make the settings below
because STANDARD automatically determines the paper thickness.
6. Press the Enter
7. Select PAPER TYPE, and then press the Menu/Right r button. Press the Paper Feed/Down d
or Ink Cover Open/Up u button to select MATTE THICK, MATTE THIN, PHOTO PAPER, or
FINE ART PAPER. Then press the Enter
8. Press the Back/Left l button.
9. Select PLATEN GAP, and then press the Menu/Right r button. Press the Paper Feed/Down d
or Ink Cover Open/Up u button to select NARROW, STANDARD, WIDE, or WIDER. Then press the
Enter button to save the selected platen gap setting.
10. Press the Back/Left l button.
button to register the paper number.
Epson Stylus Pro 3880
button.
User's Guide
The Control Panel 138