Application Settings - Epson Stylus Pro 3880 User Manual

Paper width
203 × 254 mm (8 × 10 in)
254 × 305 mm (10 × 12 in)
279 × 356 mm (11 × 14 in)
406 × 508 mm (16 × 20 in)
Note:
❏ If your application has margin settings, make sure they are set to zero before printing.
❏ The ink may contaminate the platen of the printer. In this case, wipe the ink away using a cloth.
❏ Printing with this feature takes longer time than normal printing.
❏ Smear may result in the top and bottom areas depending on the media.
❏ If you select Manual-Front for the Paper Source, the Borderless check box does not appear.
❏ Borderless printing is not supported when the PAPER SIZE CHECK setting is off. Make sure that
ON is selected for PAPER SIZE CHECK on the printer' s control panel.
Depending on the media type, the print quality may decline or the borderless printing is not
supported. See "Paper Information" on page 194 for detailed information.

Application settings

Set the size of the image data using the Page Setting dialog box of the application software.
For Auto Expand
❏ Set the same paper size as used for printing.
❏ If your application has margin settings, set the margin to 0 mm.
❏ Make the image data as large as the paper size.
For Retain Size
❏ Set the Image size 5 mm wider in all four directions using the application that created the data.
❏ If your application has margin settings, set the margin to 0 mm.
❏ Make the image data as large as the paper size.
Epson Stylus Pro 3880 User's Guide
Variety of Printings 67