Configuring The Printer For Your Network - Epson Stylus Pro 7880 User Manual

44 | Setting Up the Printer
Note: After you install
the software, you need to
load paper and print a
test image. If the print
quality is satisfactory,
your setup is done. If not,
you may need to align the
print head, as described
on page 139.
8. When the update is complete, close the Firmware Updater window and
Epson LFP Remote window.
If you connected your printer to a network, follow the instructions in the
next section to configure the printer for your network.

Configuring the Printer for Your Network

Once the printer is connected to your network, follow these steps to
configure it:
1. Turn on the printer.
2. Start EpsonNet Config.
The EpsonNet Config program searches for all Epson printers on the
network and displays the MAC address for each printer that it finds.
3. Highlight the printer that you want to configure and click
to access the TCP/IP selection screen.
Configuration
4. If necessary, contact your network administrator for instructions on
assigning an appropriate IP address.
For more information, see the on-screen Network Guide.
44