Printing On Posterboard - Epson Stylus Pro 7880 User Manual

3. Make sure the paper lever is in the
4. Feed the sheet into the paper slot until you meet resistance. Make sure
the right edge of the paper is straight and aligned with the vertical line
on the roll paper cover.
5. Press the Pause button. The sheet feeds into printing position
automatically and
6. Print your page. After it is finished, the sheet stays in the printer.
7. To remove your print, press the
while holding the printed sheet.

Printing on Posterboard

You can print on Epson Enhanced Matte Posterboard or other heavy stock
up to 24 × 30 inches (61 × 76 cm) [Pro 7880] or 30 × 40 inches
(76 × 102 cm) [Pro 9880].
Follow these steps to print on posterboard or other media more than 19 mil
(0.5 mm) thick:
1. Set the paper basket to catch your printouts in front of the printer. See
page 69 (Pro 7880) or page 71 (Pro 9880) for instructions.
2. Make sure no other paper is loaded for printing. You can leave roll paper
on the spindle, but make sure you wind it up fully and close the roll
paper cover.
Handling Paper and Other Media
Secured
appears on the LCD display.
READY
button or release the paper lever
65
position.
| 65