Components Used - Siemens SIMATIC MV320 Manual

1 Introduction
1.3

Components used

This application example was created with the following hardware and software
components:
Table 1-1
Component
Power supply
CPU315-2 PN/DP
ET 200SP
IM155-6PN ST
CM PtP
Base Unit
Server module
SIMATIC MV320 handheld
reader
RS232 cable
STEP 7 V17 Professional
Note If you use other hardware than in the example project, you must make the
corresponding changes in the hardware configuration.
Note This description also applies to the STEP 7 V16 project.
This application example consists of the following components:
Table 1-2
Component
Project
Documentation
Reading QR Codes with SIMATIC MV320 via ET200SP CM PtP
Article ID: 109474684, V2.0,
Quantity
1
1
1
1
1
1
1
1
1
File name
"109474684_ET_200SP_CM_PtP_
MV320_PROJ_V17_V20.zip"
"109474684_ET_200SP_CM_PtP_
MV320_DOC_V20.pdf"
10/2021
Item number
-
6ES7315-2EH14-0AB0
6ES7155-6AU00-0BN0
6ES7137-6AA00-0BA0
6ES7193-6BP00-0xA0
6ES7193-6PA00-0AA0
6GF3320-0HT01
6GF3 020-0AC40-0AC4
(EU)
6GF3 020-0AC40-0AC3
(USA)
6ES7822-1AA07-0YA5
This compressed file contains the
V17 project.
This description also applies to
the STEP 7 V16 project.
Note
-
Other PROFINET-
enabled CPUs from the
SIMATIC S7-300/
S7-400
range can also be used
-
-
-
Note
6