Show Option [Value1 [Value2]] - Fujitsu F2MC-16L Series User Manual

SHOW O
3.5.13.
Show data
This command displays various types of data or tables. If a data type is requested the necessary
bytes are converted and displayed.
Option: BYTE, WORD, LWORD, FLOAT, DOUBLE, STRING:
EI2OS:
VECTOR:
>show float ff0487↵
>show string _message↵
>show ei2os 7
>show vector 8 a↵
... The third example displays EI2OS-descriptor of channel 7. The last example displays
interrupt vector 8 to 10.
3.5.14. SET O
Sets various types or tables.
Options: BYTE, WORD, LWORD, FLOAT, DOUBLE, STRING:
EI2OS:
VECTOR:
>set float ff0043 3.66e-2↵
>set string _message "hELLO World"↵
>set string _message "Hello↵
>set ei2os 4 f 22 10 f80300↵
>set vector 8 _start 88↵
© FUJITSU Mikroelektronik GmbH 1996
FUJITSU MB90675-Evaluation Board - User Manual
[ V
PTION ALUE
various data formats are converted,
value1 is expected as address or symbol
(any string is skipped after 1,024 chars)
descriptor table entries are output
(0...Fh = 16 possible channels),
values are start and end descriptor channel number
interrupt vector table entries are output,
(0...FFh = 256 possible vectors)
values are start and end vector number
[ V
PTION ALUE
various data formats,
value1 is expected as address or symbol,
value2 is the new value (note, that strings finished with
' " ' are extended with zero termination else not).
EI2OS descriptor table entry,
value1 is descriptor channel number (4 Bit),
value2 is the transfer counter (16 Bit),
value3 is the I/O address (8 Bit),
value4 is the status byte (5 Bit),
value5 is the buffer address (24 Bit).
interrupt vector entry,
value1 is the vector number (8 Bit),
value2 is the address (24 Bit),
value3 is the mode byte (8 Bit).
1 [ V 2 ]]
ALUE
1 [ V 2 [ V
ALUE ALUE
3 ]]]
- 31 -