Installing The Mid-Frame Assembly With Antennas - Dell Inspiron 24 5421 Owner's Manual

Installing the mid-frame assembly with antennas

CAUTION: The information in this intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the base panel and provides a visual representation of the installation procedure.
Steps
Place the mid-frame assembly with antenna on a flat and clean surface and perform the steps in the
the mid-frame assembly with antennas.
NOTE: The mid-frame assembly with antenna consists of the following:
● Middle frame
● Base panel
● Wireless antenna
Next steps
1. Install the display panel.
2. Install the power-button board with
3. Install the stand hinges.
4. Install the microphones.
5. Install the speakers.
6. Install the system board.
7. Install theintegrated heat sink
8. Install the M.2 2230 solid-state drive
9. Install the wireless card.
10. Install the memory module.
USB.
or discrete heat sink.
or M.2 2280 solid-state drive, as applicable.
Removing and installing Field Replaceable Units (FRUs)
Post-requisites to install
99