Table of Contents
Advertisement
COVERS
3.1.10 INTERLOCK MECHANISM
[B]
Removal
1. Remove screws [A] (
2. Remove interlock mechanism bracket [B].
Replacement
1. Reverse the removal procedure.
Adjustment
1.
Make sure interlock box is mounted correctly (
2.
Loosen nuts [A] (
3.
Adjust the interlock mechanism [B] so that it is parallel to the Top cover and so
that the interlock switch is actuated 2 mm before Top cover is closed measu-
red on front side beneath handle.
4.
Tighten nuts [A] (
x 2).
x2).
x2).
TR-3-10
20 October 2010
[A]
3.1.7).
Advertisement
Table of Contents
