Control Switch S2 - Sharp MX-TMX1 Service Manual

AREA C

3.2.2 CONTROL SWITCH S2

Removal
1. Remove Rear cover (
2. Remove connectors [A] (
3. Remove screws [B] (
Replacement
1. Reverse the removal procedure.
Adjustment
1. Lift the Infeed shaft.
2. Make sure the Switch activates slightly before the shaft latches in upper posi-
tion.
3. To adjust, loosen screws [B] (
4. Reposition switch to obtain adjustment.
5. Tighten screws [B] (
[A]
[B]
3.1.1).
x2).
x2 ).
x2 ).
x2 ).
TR-3-12
20 October 2010