Length Adjustment Home Position Switch S11 - Sharp MX-TMX1 Service Manual

AREA C

3.2.13 LENGTH ADJUSTMENT HOME POSITION SWITCH S11

[B]
[Picture 2]
Removal
1. Remove Stop gate carriage (
2. Remove screws [B] (
3. Remove connectors [A] (
Replacement
1. Reverse the removal procedure.
Adjustment
1. Place a ruler across the slide rods and up against the flange bushings
[Picture 1].
2. Position the switch so it is activated by the ruler and
so there is a 0.5 mm ± 0.2 mm gap between switch body and ruler [Picture 2].
3. Tighten screws [B] (
3.2.10).
x2).
x2).
x2).
TR-3-28
[Picture 1]
20 October 2010
[A]