LG 14HK701G-W.AUB Owner's Manual page 52

IP Address Check and Ping Test
• The detector has a default IP address.
• If the IP address of the detector is changed, a new IP address must be entered in the detector IP in the Calibration tool.
• After completing the IP Address and Timeout settings, click the [Ping] button to run a [Ping Test]. A pop-up message appears when the [Ping Test] is successful.
• If the [Ping Test] fails, a pop-up appears as shown below. If this pop-up appears, check your PC network settings, detector-to-PC connection, status of the detector, status of the Control Box, and IP address, and run
the [Ping Test] again.
15