Table of Contents
Advertisement
3
When a pop-up appears, change the settings and click the [Apply] button.
- Start changing the IP address by selecting the [Apply] button.
4
Check the result and re-boot the detector.
•
A pop-up appears to with the following message whether the IP address is changed or not.
<A pop-up when the settings are made successfully>
•
Once the IP address is changed, re-boot the detector to complete applying the changes to the IP.
•
Click the OK button to automatically re-boot the detector.
•
The detector will be disconnected during the re-boot process. Make sure to perform the [Connection &
File Save] process again.
39
Advertisement
Chapters
Table of Contents
Troubleshooting
