LG 14HK701G-W.AUB Owner's Manual page 77

Wireless AP configuration
When the detector is connected wirelessly, AP information must be saved in the detector.
For station mode, enter the information of the external AP trying to access the detector. For AP mode, enter the information about the detector's AP.
• Default value of detector
- SSID: LGEDXD
In station mode, the detector attempts to connect to the AP when the detector is rebooted after the AP information is saved in the detector. In AP mode, the detector uses its own AP, utilising the AP information saved
on the user PC. You can see the saved AP information by using the web monitoring function.
1
Launch "Launching Program"> "IP Address Check and Ping Test"> "Save Location Check"> "Apply" in order.
2
After checking that wireless settings are enabled on the PC, click the [Wireless Setup] button.
40