Panasonic WORKIO DP-CL21 Maintenance And Specifications page 54

Settings and Printing
! Printer Error Messages (User Error)
Error Message
Output Tray
Full
Memory Overflow
HDD I/O Error
FSR
Not Installed
TC-C
Not Installed
TC-C
Replace
TC-M
Not Installed
TC-M
Replace
TC-Y
Not Installed
TC-Y
Replace
TC-K
Not Installed
TC-K
Replace
Maintenance and Spec.
Maintenance and Spec.
Possible Cause
Output tray is full.
There is not enough memory in
the printer.
HDD I/O error has occurred.
Fuser unit is not installed.
Cyan toner cartridge is not
installed.
Cyan toner cartridge is empty.
Magenta toner cartridge is not
installed.
Magenta toner cartridge is empty.
Yellow toner cartridge is not
installed.
Yellow toner cartridge is empty.
Black toner cartridge is not
installed.
Black toner cartridge is empty.
Network
Warning / Printer Error Messages
Corrective Action
Remove the printed media from
the output tray.
Add memory or select a lower
resolution in the printer driver.
Perform Check Disk operation in
the HDD Maintenance mode.
If it still remains, perform Quick
Format or HDD Format operation
in the HDD Maintenance mode
(see "Using the HDD
Maintenance Mode" on page 76
in "Settings and Printing).
Install the fuser unit.
Install the cyan toner cartridge.
Replace the cyan toner cartridge.
Install the magenta toner cartridge.
Replace the magenta toner
cartridge.
Install the yellow toner cartridge.
Replace the yellow toner cartridge.
Install the black toner cartridge.
Replace the black toner cartridge.
54