Transparencies And Labels - Panasonic WORKIO DP-CL21 Maintenance And Specifications

Settings and Printing

! Transparencies and Labels

You may also print on labels and transparencies that are made for the printer. Panasonic has tested
and found that the following transparencies and labels work satisfactorily.
OHP transparencies:
Labels:
• To avoid damaging the printer, do not use ink jet transparency.
• Transparencies and adhesive material of labels should be stable at 205°C (400°F), the printer's
maximum temperature.
• Re-using transparencies that have been fed through the printer once (for example, after jams or if the
transparency is ejected without being printed) can reduce the life of the consumables and/or paper
path components.
• When using transparencies, if the print quality is poor, print on the other side.
NOTE:
• With any label stock, the labels must completely cover the backing material (see figure below).
Labels cover the entire
backing material
Maintenance and Spec.
Maintenance and Spec.
3M CG3300
Avery 5160 - Avery 5163, Avery 5660 - Avery 5663
Avery L7159 - Avery L7164
YES
Network
NO
The backing material is exposed.
93
Specifications