Setting (Base Unit)
Ink film
Setting (Base Unit)
1
Open the front cover by pulling up the
center part.
Center part
Front cover
2
Release the back cover by pushing the
back cover open button (green) on the right
side of the unit.
OR
Release the back cover by pushing the
back cover open lever (green) in the unit.
Back cover
open lever (green)
14
Back cover
open button
(green)
For Fax Advantage assistance, call 1-800-435-7329.
3
Open the back cover.
4
Insert the blue core of the front ink film roll
into the right slot of the unit (1). Insert the
"T" shaped gear (blue) into the left slot of
the unit (2).
Insert the rear ink film roll (3).
L The ink film is safe to touch, and will not
rub off on your hands like carbon paper.
"T" shaped
gear (blue)
2
Left
slot
Front ink
film roll
Back cover
Rear ink film roll
Right slot
3
1
Blue core