Panasonic KX-FPG371 Operating Instructions Manual page 90

Features Summary
Code #36: Receiving oversized documents
RCV REDUCTION
MODE=92% [±]
If the size of the document sent by the other
party is as large as, or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.
Setting Recording
paper size
100% Legal
A4
92% Letter
(default)
Legal
A4
86% Letter
72% Letter
A4
Code #39: Changing the display contrast
LCD CONTRAST
MODE=NORMAL [±]
NORMAL (default): For normal contrast.
DARKER: Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
MODE=ON [±]
If you use an extension telephone and wish to
use it to receive a fax, activate this feature and
program the activation code.
1. Press {MENU}.
2. Press {#}, then {4}{1}.
3. Press {+} or {-} to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0– 9,
# and *.
L The default code is "
L Do not enter "0000".
6. Press {SET}.
7. Press {MENU}.
90
Original
document
size
Letter, A4
Letter
Letter
Legal
A4
A4
Legal
Legal
@
#9".
See page 87 for the programming method.
Code #42: Setting the message alert
MESSAGE ALERT
MODE=OFF [±]
To alert you with beeps when a new voice
message is recorded. If you hear slow beeps,
listen to recorded messages. The beeps will
stop.
ON: You will hear a beeping sound.
OFF (default): Deactivates this feature.
Code #43: Setting the recording time alert
REC. TIME ALERT
MODE=OFF [±]
To alert you with beeps when there is less than
60 seconds of remaining recording time. If you
hear slow beeps, erase the recorded messages
(page 75, 80). The beeps will stop.
ON: You will hear a beeping sound.
OFF (default): Deactivates this feature.
Code #44: Setting the memory reception alert
RECEIVE ALERT
MODE=ON [±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
If you are alerted by a slow beeping sound, clear
the printing problem and make sure the unit is
supplied with enough paper to print the stored
document. The beeps will stop.
ON (default): You will hear a beeping sound.
OFF: Deactivates this feature.
Code #46: Setting the friendly reception
FRIENDLY RCV
MODE=ON [±]
To receive a fax automatically when you answer
a call and hear a fax calling tone (slow beep).
ON (default): You do not have to press
{FAX/START} for fax reception.
OFF: You have to press {FAX/START} for fax
reception.