Receiving Mode - Panasonic KX-FPG371 Operating Instructions Manual

Compact plain paper fax with 2.4 ghz cordless and answering system
Hide thumbs Also See for KX-FPG371:
Table of Contents

Advertisement

L You may have used paper with a cotton
and/or fiber content that is over 20%, such as
letterhead or resume paper. We recommend
smooth paper such as "Hammermill Jet Print"
for clearer printing.
I cannot receive documents by pressing * * * * #9
on the handset.
L You must set the remote fax activation to on
(feature #41, page 90) beforehand.
L Press *#9 firmly. A single beep will be
heard.
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper or clear the
jammed paper.
The other party complains that they cannot
send a document.
L The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 18)
or clear the jammed paper (page 103).

Receiving mode

I cannot select the desired receiving mode.
L If you want to set TAD/FAX or FAX ONLY
mode:
– select the desired mode using feature #77
(page 92), and
– press { { { { AUTO ANSWER} } } } repeatedly until
the desired mode is displayed.
L If you want to set TEL mode:
– press { { { { AUTO ANSWER} } } } repeatedly until
TEL mode is displayed.
The other party complains that they cannot
send a document.
L The unit is not in TAD/FAX or FAX ONLY
mode. Select the desired mode using feature
#77 and press { { { { AUTO ANSWER} } } } repeatedly
until TAD/FAX or FAX ONLY mode is
displayed.
Frequently Asked Questions
For Fax Advantage assistance, call 1-800-435-7329.
Copying
The unit does not make a copy.
L You cannot make a copy during
programming. Make the copy after
programming or stop programming.
L You cannot make a copy during telephone
conversation.
A black line, a white line or smudge appears
on the copied document.
L The glass or rollers are dirty. Clean them
(page 108).
The copied image is distorted.
L The thermal head is dirty. Clean it
(page 109).
The printing quality is poor.
Note:
Please do not reuse the ink film!
Please use genuine Panasonic replacement
film. Refer to page 10 for further details.
Original
A BC
L Some paper has instructions recommending
which side to print on. Try turning the paper
over.
L You may have used paper with a cotton
and/or fiber content that is over 20%, such as
letterhead or resume paper. We recommend
smooth paper such as "Hammermill Jet Print"
for clearer printing.
Copy
99

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fpg371 - b/w thermal transfer

Table of Contents