Table of Contents
Advertisement
OSD Menu
Channel Settings
This menu is used for input related settings. Select the [Select Channel] and choose a channel number from CH1 to
CH20. Finally define the parameter of each of the [Channel Settings].
"Supported Signal Format" (
36
Sub Menu
Select Channel
Input Configuration
Select Input Signal
77)
CH1 to CH20
Display the channel number. In addition, you can assign each content of
[Channel Settings] to each channel (
• It may take 3 seconds when switching channels.
12-3G/HD-SDI
Select the input. Factory default depend on the channel (
HD/SD-SDI
When [Multi View] is selected, the signal to be input to each of the screens
HDMI
can be selected from an SDI signal or an HDMI signal. SD-SDI signals
Multi View
cannot be displayed.
— (Not set)
Automatic
Sets the signal display method.
Quad Input
Dual Input A,B
[Automatic]: The display method is automatically determined to match the
Dual Input C,D
Single Input A
[Quad Input]: Four input signals (Input A to Input D terminals) are
Single Input B
Single Input C
[Dual Input A,B]: Two input signals (Input A terminal and Input B terminal)
Single Input D
[Dual Input C,D]: Two input signals (Input C terminal and Input D terminal)
[Single Input A], [Single Input B], [Single Input C], [Single Input D]: One
• Settings that can be set differ according to the input signal.
- [HDMI]: Fixed to [Automatic].
-
Setting Options
input signal.
displayed.
are displayed.
are displayed.
input signal (any of Input A to Input D) is displayed.
[HD/SD-SDI]: Only [Single Input A] to [Single Input D] can be selected.
14).
15).
Advertisement
Table of Contents
