Canon DP-V2730 Operation Manual page 39

Sub Menu
Channel Name
Picture Mode
Type
[Type]
When [Normal]
Picture Mode
When [4K/2K]
Resolution 4K, 2K
When [Automatic]
Resolution 4K, 2K
Payload
UHD/PQ,
UHD/HLG, UHD,
709/PQ,
709/HLG, 709,
VANC, Unknown
Camera
CINEMA EOS
SYSTEM,
ARRI, VARICAM
When [Quad]
Screen A ~ D
When [Dual]
Screen A ~ B
Marker Preset
Sets the name of the selected channel. You can input up to 16
alphanumeric characters.
Set [Picture Mode] by individual channel.
Normal [Normal]: Sets one [Picture Mode].
4K/2K [4K/2K]: Sets [Picture Mode] by individual 4K or 2K signal screen.
Automatic [Automatic]: [Picture Mode] is set according to the SDI signal. The set
Quad
Dual
[Quad]: Sets a picture mode for each of screens A to D when [Image
[Dual]: Sets a picture mode for each of screens A and B when [Image
ITU-R BT.709 Set the [Picture Mode] for each screen.
ITU-R BT.2020
Adobe RGB [ACESproxy (ver. 1.0.1)]: Can be set when [Type] is [Normal].
DCI-P3 [—] (Not set): Cannot automatically change image quality to suit input
User 1 (2020 PQ)
User 2 (2020 HLG)
User 3 (DCI PQ)
• Colorimetry Bit/Transfer Characteristics of the SDI Payload ID supports the signal
User 4 (DCI PQ D65)
in conformity with the following standard.
User 5 ~ User 9
SMPTE ST 2082-10:2018 (12G-SDI)
CINEMA EOS SYSTEM
SMPTE ST 2081-10:2018 (6G-SDI)
ACESproxy (ver. 1.0.1)
SMPTE ST 425-1:2017 (3G-SDI Single Link / Square Division)
— (Not set)
SMPTE ST 425-3:2019 (3G-SDI Dual Link(2SI) )
SMPTE ST 425-5:2019 (3G-SDI Quad Link(2SI) )
SMPTE ST 292-1:2018 (HD-SDI)
• Settings that can be set differ according to the input signal.
- [Input Configuration] [HDMI]: [4K/2K] and [Automatic] cannot be set in [Type].
- When [Input Configuration] [HD/SD-SDI], [Type] is fixed to [Normal].
Sets [Marker Preset] (
Marker 1
Marker 2
Marker 3
Marker 4
Marker 5
Off
Setting Options
[Picture Mode] is changed to in the order camera metadata →
Payload → resolution (4K/2K).
Division] is set to [Multi View (Quad)].
Division] is set to [Multi View (Dual)].
signal. Can be set when other than [Resolution 4K] and [Resolution
2K] are selected in [Type] [Automatic].
45) for the specified channel.
OSD Menu
39