Table of Contents
Advertisement
OSD Menu
Sub Menu
Aspect (SD-SDI)
42
Video Position
(Multi View)
Zoom
Zoom Preset
Magnification
Position
Frame Hold
Automatic
Sets the size for displaying SD-SDI signal images.
16:9
4:3
[Automatic]: Automatically determined based on payload.
[16:9]: Images are displayed with an aspect ratio of "16:9".
[4:3]: Images are displayed with an aspect ratio of "4:3".
• When the following functions are activated, [4:3] is selected.
-
-
-
Top
When using [Multi View (Quad)], [Multi View (Dual)], or [Single Input Dual
Middle
View]
Center
Sets the vertical display position for the image.
[Top]: Displays at the top of the screen.
[Middle]: Displays at the top middle of the screen.
[Center]: Displays at the middle of the screen.
Enlarges part of the video image. The zoom function can be used when the resolution is [4096x2160],
[3840x2160], [2048x1080] or [1920x1080].
• The zoom function cannot be used in the following cases:
- During execution of [Playback File] under [Screen Capture]
- During display of the test pattern
-
When [Multi View (Quad)], [Multi View (Dual)] or [Single Input Dual View] is selected
-
When [Channel Settings] [Input Configuration] [HD/SD-SDI]
- When [Picture Function Settings] [Compare View] [Enable] is set to [On]
• While the zoom function is in use, the various markers are not displayed.
• When zoom settings are changed, [Frame Hold] turns [Off].
Zoom 1
Sets the zoom display method. There are three presets.
Zoom 2
Zoom 3
Off
x2
Sets the display scale of zoom.
x4
x8
The zoom adjustment screen is displayed. Use the jog dial to adjust the
display position.
On, Off
Pauses the video.
• If the image quality setting is changed while the video is paused, the setting may
not change correctly.
• In the case of an interlaced signal, the video pauses in either field (odd or even).
Setting Options (Bold: factory default)
Peaking
False Color
Range Check
Advertisement
Table of Contents
