Canon DP-V2730 Operation Manual page 59

Sub Menu
Signal Monitoring
Control
Error Hold
No Signal/Unsupported
Signal
2SI Link Order
SDI CRC Error
8K 2SI Format
Export
Error Log
Screen Capture
Capture
Frame Hold
Capture Source
Create HDR/SDR
Compare File
Monitors the input signal status.
• [Signal Monitoring] cannot be used in the following cases:
- When [Single Input Dual View] is displayed
- When an enlarged image is displayed
- During display of the test pattern
- During execution of [Playback File] under [Screen Capture]
- When [Channel Settings] [Input Configuration] [Multi View]
- When [Function Settings] [Multi Information View]
• When an error is displayed, [In Monitor Display] will not be shown.
• The position the error is displayed can be adjusted with [In Monitor Display] [Position].
On, Off Sets whether [Signal Monitoring] is used or not.
On (No time out) Sets the length of time for displaying errors, when they are detected.
On (5 sec.)
Off [On (No time out)]: Errors continue to be displayed. To hide the displayed
[On (5 sec.)]: The displayed error will disappear 5 seconds after the initial
[Off]: Only displays errors during the period when they are detected. The
On, Off Displays an error when there is [No Signal] or [Unsupported Signal].
On, Off Displays an error when the cables inserted into the input terminals are in
the wrong order when using signals input via [2 Sample Interleave].
On, Off Displays an error when an incorrect SDI signal is detected (CRC error).
On, Off Monitors the input signal status for the four terminals using the SDI signal
when [Channel Settings] [Select Input Signal] is set to [Automatic].
Exports the error history to USB memory. The file name is "signal_error_xxx.txt (xxx is a number)".
Displays error history.
Captures the screen.
Captures the screen. The data is saved under the name "YYYYMMDD_
hhmmss.bmp" in the root folder of the USB memory.
On, Off Pauses the video.
All Selects the sources to capture.
Video
[All]: Everything is captured including video assistance functions such as
[Video]: Only video signals are captured.
On, Off Creates a file that lets you compare the brightness of HDR and SDR
images on a computer. When saving, [_pc] is appended to the file name.
Setting Options (Bold: factory default)
error, press the RESET button when closing the OSD menu.
detection.
displayed error message will disappear once the error ends.
markers and wave form monitor as well as OSD menu.
OSD Menu
59