Canon DP-V2730 Operation Manual page 96

Error Messages
DC power supply
96
Power Saving
Message
Low Voltage.
Low Voltage, Turn off power.
Invalid Voltage, Turn off power.
No Signal, Turn off power by Power Save function.
No Signal, Turn off power.
Description and Action
The battery charge level drops if using the battery.
If you use another power source, check the input
voltage of the DC power supply.
The power has shut off as DC power voltage
became insufficient for continued operation.
There may not be enough energy left if you are using
the battery. Connect a charged battery and turn the
video display power on.
If you use another power source, check the input
voltage of the DC power supply.
The power has shut off as the DC power input
voltage exceeded the operational threshold. Check
the input voltage of the DC power supply.
This indicates that there have not been any signals
for the time set to [Power Save]. The power will be
turned off approximately 5 minutes later. Check the
input signal.
This indicates that the power is turned off after
approximately 5 minutes as there has been no signal.
Check the input signal.