Panasonic KX-TD500 User Manual page 129

Canceling
Display PT
0 0 5
Dial 005.
<PT Display>
005 FLEXIBLE CO
CO
Press CO which is changed
to another button.
The display shows the contents
pre-assigned to the button.
<PT Display Example>
CO-10101
Conditions
• The number of the CO buttons available for each PT varies depending on the telephone type
<Section 1.16 Button Features, "Buttons on Proprietary Telephones and DSS Consoles" in
the Features Guide>.
To program 24 CO buttons, use the proprietary telephone with 24 CO buttons, such as KX-
T7230.
• If you press the same CO button again at step 5, you can select a desired ringer frequency
for the CO button from eight types of ring tones. When you enter the tone type number (1
through 8), you will hear the selected tone type until STORE is pressed. This selection is
possible only for the CO buttons that have been assigned to Single-CO, Group-CO, Loop-
CO, PDN or SDN.
User Manual
NEXT
Press NEXT.
<PT Display>
EXT NO? →
2
Press STORE.
Dial 2.
extension no.
Enter an extension number
(3 or 4 digits).
To enter the lowest extension
number, you can also press
NEXT.
<PT Display>
PT-PGM Mode
END
STORE
Press END.
User Programming
129