Ringing Tone Selection For Co Buttons - Panasonic KX-TD500 User Manual

2.2.13 Ringing Tone Selection for CO Buttons

Allows you to assign a ringer frequency to each CO (S-CO, G-CO, L-CO) or DN (PDN, SDN)
button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
DPT
Press CO, PDN or SDN
which you wish to
change the ringing tone.
The display shows the current
status.
The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.
<DPT Display Example>
Tone Type-X
If you want to change the tone type, enter another tone type
number.
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• The default is Ringing Tone Type 2.
• This feature applies to the following line access buttons:
S-CO, G-CO, L-CO, PDN, SDN
User Manual
Press the same CO,PDN
or SDN again.
(-x:tone type number)
tone type no.
Enter the tone type number
(1 through 8).
The STORE indicator lights.
The display shows the initial
programming mode.
Station Programming
AUTO DIAL
STORE
Press STORE.
95