Panasonic KX-TD500 User Manual page 295

Group Log-In / Log-Out for members of an Incoming Group (Using the feature number)
PT and SLT
Lift the handset
or press
SP-PHONE/MONITOR.
Confirmation tone
Hang up or press
and dial tone
SP-PHONE/MONITOR.
Conditions
• When extensions are logged out, calls directed to the above mentioned group do not come
in on their extensions.
However, calls directed to their individual extension (extension call, DIL 1:1, etc.) still ring
at their extension.
• The extension user cannot leave the group (log-out), if at least one call is coming in on the
group.
•
Log-In / Log-Out (Group Log-In / Log-Out) button
Log-In / Log-Out (Group Log-In / Log-Out) button can be assigned to a flexible CO button
by Station, User or System Programming.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature
using a display operation.
• UCD Login Monitor
<For Extension Group members>
Login / Logout status of the UCD Group members can be monitored through Busy Lamp
Field of the corresponding DSS button. UCD Login Monitor is enabled or disabled by
System Programming.
<For Incoming Group members>
Login / Logout status of the UCD Group members can be monitored by the extension
specified as the Supervisor Extension through Busy Lamp Field of the corresponding DSS
button.
• All Logout
All extensions in the Extension Group or Incoming Group can be logged-out.
This is determined by System Programming <Section 2.8 System Option, "60. Empty
Group" in the Programming Guide>.
If this feature is disabled by System Programming, the extension user cannot leave the
User Manual
4 8 1 To Log-In
4 8 0 To Log-Out
For Log-In mode: Dial 481.
For Log-Out mode: Dial 480.
<PT Display Example>
Group Log-in
Group Log-out
Station Features and Operation (PT/SLT)
For an Incoming group
FDN
For all Incoming groups
For an Incoming group: Enter FDN (3 or 4 digits).
For all Incoming groups: Dial
or
.
295