Station Features and Operation (PT/SLT)
•
The Two-Way Record indicator shows the feature status as follows.
•
During Keep Recording mode, if you want to stop recording the conversation, press the
Two-Way Recording button.
•
Call Waiting
If the extension user is busy on a call when a caller begins to leave a message, a call waiting
tone is sent (if programmed beforehand). The extension user can put the current call on hold
before accessing LCS.
•
LCS button/LCS Cancel button
A flexible CO and DSS button can be assigned as an LCS/LCS Cancel button.
•
LCS Password Clear
To prevent unauthorized monitoring, a 3-digit password must be set by the extension user.
If the user forgets their password, it can be cleared by the Manager extension or an Operator.
•
Recording Mode
Each extension can be programmed to either stop or continue recording the conversation
after intercepting the recording in order to talk with the caller.
•
LCS by an SLT (only in Private Mode)
An SLT which is connected with a PT in parallel, can also be used to monitor a message
being recorded. Be sure that Live Call Screening on the connected PT has been activated.
• With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature
using the display operation.
Programming Guide References
• 2.3 Numbering Plan
– Live Call Screening
• 4.3 Extension Line
– [LCS Setting] Status
– [LCS Setting] Operation Mode
– [LCS Setting] Recording Mode
– [LCS Setting] LCS Password
– CO Key
• 4.4 DSS Console
– DSS Key
290
On: Recording the conversation
Off: Not recording
User Manual