Fujitsu TeamPoS 7000 Series User Manual page 22

Base unit

The connectors, which located inside the Base unit.
(Right side)
Name.
H - *1
G
COM1 - *1
COM2
IO IO board *2
*1 : There is no POS peripherals of Fujitsu.
*2 : This connector is exclusive use for TeamPoS7000 A-series. DO NOT connect other unit
and cable.
Limited Power Source
 The 24V powered USB port on the terminal does not meet UL limited power source (LPC)
requirements. This port is limited to only allowing 24V Retail POS powered USB
peripherals that do not exceed a rated current of 0.2 Amps and are provided with a molded
plastic Fire Enclosure, Rated Min. 94V-1 or Metal enclosure.
 The 24V Cash Drawer port on the terminal does not meet UL limited power source (LPC)
requirements. This port is limited to only allowing 24V Retail POS powered USB
peripherals that do not exceed a rated current of 0.2 Amps and are provided with a molded
plastic Fire Enclosure, Rated Min. 94V-1 or Metal enclosure.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
H
COM1
G
Usage
USB
D-Sub 9Pin (Male)
[RS232C interface]
Special connector
(Left side)
Connector
Exclusive use for TeamPoS7000
Cable connected IO board and Main
unit.
COM2
IO
Note
Page 8