Fujitsu TeamPoS 7000 Series User Manual page 27

3. The following screen will be displayed for the calibration of touch panel.
Touch the target mark on the screen. Then target mark move to the next position, again
and again till target mark stop appearing.
4. The following window will be displayed, when the calibration has finished.
Touch any position except the button, and if the cursor moves to the touched position.
Click [Update], if it is OK.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Page 13